PyGame Platform

This will show you how to create a platform game using a tiled map, and rectangular based collision detection. If you wanted to create this for your project you should make it Object Oriented.

Create Map

Tiled

You will firstly need to install the Tiled program from the website and link below. In college the Tiled executeables are on moodle, under project, technical skill, monogame, and tiled. I have also added links to other tutorials for using Tiled.

Tiled Website and Download

Tiled Map Editor

Tutorials for using Tiled

Offical Tiled Tutorials

Tiled Basics

Tiled Youtube Playlist Series

Written Version of Above Tutorials

New Tiled Map

You will need a new tiled map, the tile size in the screen shot is 128 pixels, in the end i actually changed this to 32 x 32 and resized the tiles accordingly:

Add Tile Set

Now your map is created we need to add a tile set:

I would always recommend you make sure to choose embed and based on tileset image:

Draw Your Level

Now you have a tile set build a simple set of platforms. You should rename the layer to something like Tiles:

Add Player Object

Now you have a section of platforms, we can now set the position of the player. This will also be the object moved by the code and player input. So insert an object layer, and then use the rectangle tool to create the object. My final player was 60 pixels high and 40 pixels wide:

Collectables

Now within the objects layer create 3 new objects for the coins. I have created 3 new objects called Coin1 , Coin2 , and Coin 3. I have also set the type to Coin and the height & width of each object to 16 pixels:

Now, click on the Object layer and in the properties panel add a custom property (+ symbol in bottom left corner). Make an integer called Coin_Count:

PyGame Project

Create a new pygame project, you could use THIS template. You will need to copy the TMX map you have created and the tilesheet image into the same folder as the python program.

Install PyTMX

The current version of writing this is 3.21.5, you need to select Tools, Python, Python Environments.

Select Packages and search for PyTMX, this page will show you how to use PyTMX. Other TMX solutions exist and i will overtime have a look to see which are the best.

Import PyTMX

We need to import PyTMX, you need to add the following lines to the start of your code:

import pytmx
from pytmx.util_pygame import load_pygame

load_pygame is a method used to load in the map and tileset.

Read in Map

Make sure your map is within the same folder as your code, and that your tileset image is also in the same folder. Obviously make sure you change the name to your tmx file:

tiled_map = load_pygame('SimplePlatform.tmx')
tilewidth = tiled_map.tilewidth
tileheight = tiled_map.tileheight

If you are using tiles with transparent sections, you will need to change the code to load the map to this:

tiled_map = load_pygame('SimplePlatform.tmx', pixelalpha=True)

We will also need to read in the collision layer, this will be used to restrict player movement and shouldn't get drawn:

collision = tiled_map.get_layer_by_name('Tiles')

Load in Player image

We will also need to load in an image to use for the player object:

#Player image
player = pygame.image.load(os.path.join("hero.png")).convert_alpha(); # load in coin image, convert_alpha will keep transparent background
player = pygame.transform.scale(player, (40, 60)) # resize player image, this should be the same size as the map object

Draw the Map

Now, within your game loop we need to draw the map. We can do this by cycling through the layers within the map. A for loop is created, and it iterates for each layer. It is important to test if the layer is a Tile layer first. If it is a different layer we will need to draw it differently. Once we have a Tile layer, we can create a for loop to cycle through every tile. If the tile has a value we can then blit it to the screen. The location is calculated using the x & y values:

    for layer in tiled_map.layers:
        if isinstance(layer, pytmx.TiledTileLayer):
            for x, y, tile in layer.tiles():
                if (tile):
                    SCREEN.blit(tile, [x*tilewidth,y*tileheight])

        elif isinstance(layer, pytmx.TiledObjectGroup):
            for object in layer:
                if (object.type=='Player'):
                    SCREEN.blit(player, (object.x, object.y))

        pygame.display.update()

The elif will be accessed if the layer is an object layer. We can then cycle through each object, and if the object has an image we can blit it to the screen at the x & y of the object.

Center Map on Object

You can read an object from your map, this could then be used to center the map to this object. The object has an x & y coordinate and these can be used to essentially set the camera position over your map:

CAMERA = tiled_map.get_object_by_name("Player")

We can now use the object to change the drawing code. If you minus the camera x & y coordinates from the drawing coordinates, you will have your centred position in the top corner. You therefore need to add half of the screen width and height to have it in the centre of the screen. You will also need to change the code to draw each object:

for layer in tiled_map.layers:
        if isinstance(layer, pytmx.TiledTileLayer):
            for x, y, tile in layer.tiles():
                if (tile):
                    SCREEN.blit(tile, [(x*tilewidth) - CAMERA.x +(SCREENWIDTH/2) , (y*tileheight) - CAMERA.y + (SCREENHEIGHT/2)])

        elif isinstance(layer, pytmx.TiledObjectGroup): 
            for object in layer:
                if (object.type=='Player'):
                    SCREEN.blit(player, [object.x - CAMERA.x +(SCREENWIDTH/2), object.y - CAMERA.y + (SCREENHEIGHT/2)])

Falling

Falling is the key part of a platform game, the player is essentially always falling but colliding with the tile below. Firstly we need to create some additional variables:

fallspeed = 1

When you fall, you accelerate and speed up as you fall further. You could spend a lot of time adding values for the mass of the player/object, air resistance etc but i will simply increment the fallspeed every run through the game loop. When you land on a tile the fall speed will be set back to 1. So find your game loop, and add:

#set pos for falling
pos = [0,fallspeed]
fallspeed+=1

#From this point we need to check for hitting the ground
#If we have set pos[1] to 0 and fallspeed to 1
#Get player movement
#check for the player hitting tiles on the left & right
#if we have set pos[0] to 0

#Set new player position
tiled_map.get_object_by_name("Player").x += pos[0]
tiled_map.get_object_by_name("Player").y += pos[1]

At this point your player should fall through the floor.

Checking Ground

Earlier you added a line to read the collision layer from the map:

collision = tiled_map.get_layer_by_name('Tiles')

Add the following code to extend this, it creates an empty list and the cycles through each tile in the collision layer. If there is a tile it will add it to the tiles list. This will be used to check the player position:

collision = tiled_map.get_layer_by_name('Tiles')
tiles = []
for x, y, tile in collision.tiles():
        if (tile):
             tiles.append(pygame.Rect([(x*tilewidth), (y*tileheight), tilewidth, tileheight]));

Now create this method, it accepts the player rectangle and then checks this with the list of tiles:

#tiles is a list of all the tiles in the collision layer
def checktiles(playerrec):    
    check = False
    if (playerrec.collidelistall(tiles)): #this tests every tile with the player rectangle
        check = True
    return check

Finally we need to edit the game loop, so find the following:

#set pos for falling
pos = [0,fallspeed]
fallspeed+=1

#From this point we need to check for hitting the ground
#If we have set pos[1] to 0 and fallspeed to 1
#Get player movement
#check for the player hitting tiles on the left & right
#if we have set pos[0] to 0

#Set new player position
tiled_map.get_object_by_name("Player").x += pos[0]
tiled_map.get_object_by_name("Player").y += pos[1]

Add these additional lines, these create a rectangle for where the player will move to, and then passes this into the checkbounds method:

#set pos for falling
pos = [0,fallspeed]
fallspeed+=1

#Create rectangle for the player
x = tiled_map.get_object_by_name("Player").x
y = tiled_map.get_object_by_name("Player").y+pos[1] #checks where it will be not where it is
w = tiled_map.get_object_by_name("Player").width
h = tiled_map.get_object_by_name("Player").height
playerrec = pygame.Rect([x,y,w,h])

#Check player rectangle with tiles
#If collision cancel movement
if(checktiles(playerrec)):
    pos[1] = 0

#Get player movement
#check for the player hitting tiles on the left & right
#if we have set pos[0] to 0

#Set new player position
tiled_map.get_object_by_name("Player").x += pos[0]
tiled_map.get_object_by_name("Player").y += pos[1]

If a collision happens we can ignore the movement by resetting pos for the height back to 0.

Jumping

Jumping is relatively straight forward, we just need to minus a value from the current y position when a key is pressed. So inside your game loop, find this code:

#set pos for falling
pos = [0,fallspeed]
fallspeed+=1

and add these lines:

#set pos for falling
pos = [0,fallspeed]
fallspeed+=1

PRESSED = pygame.key.get_pressed()

if PRESSED[pygame.K_UP]:
        pos[1]-=64

Move Player in Map

In the game loop we need to check for left and right movement, so find this code:

#set pos for falling
pos = [0,fallspeed]
fallspeed+=1

PRESSED = pygame.key.get_pressed()

if PRESSED[pygame.K_UP]:
        pos[1]-=64

And add these extra keys:

#set pos for falling
pos = [0,fallspeed]
fallspeed+=1

PRESSED = pygame.key.get_pressed()

if PRESSED[pygame.K_LEFT]:
        pos[0]-=10
elif PRESSED[pygame.K_RIGHT]:
        pos[0]+=10
if PRESSED[pygame.K_UP]:
        pos[1]-=64

Now your character can move left and right, but they can walk through walls. We need to create another rectangle for the position the player will move to, we can then check for collisions and reset the pos[0] value back to zero. So find this code:

#Create rectangle for the player
x = tiled_map.get_object_by_name("Player").x
y = tiled_map.get_object_by_name("Player").y+pos[1]
w = tiled_map.get_object_by_name("Player").width
h = tiled_map.get_object_by_name("Player").height
playerrec = pygame.Rect([x,y,w,h])

#Check player rectangle with ground
#If collision cancel movement
if(checktiles(playerrec)):
    pos[1] = 0
    fallspeed = 0
            jumping = False
            jumpspeed = 8

#Get player movement
#check for the player hitting tiles on the left & right
#if we have set pos[0] to 0

Straight after this add the code below to create the new rectangle and perform the checks:

    #check player movement with the sides
    x = tiled_map.get_object_by_name("Player").x+pos[0]
    y = tiled_map.get_object_by_name("Player").y+5 #5 added so very top isn't touching a tile
    w = tiled_map.get_object_by_name("Player").width
    h = tiled_map.get_object_by_name("Player").height -10 #10 added, 5 for the top and 5 so the very bottom isn't checked
    playerrec = pygame.Rect([x,y,w,h])
    if(checktiles(playerrec)):
        pos[0] = 0

You should now have a player that can jump, move, and collide.

Collectables

Earlier, you have added coins to your map we will now load in an image to use and then create a list of objects:

Read Coin Image

you have already added the code to load in the player image, so under this you could also load in the coin image:

#Coin image
coin = pygame.image.load(os.path.join("Coin.png")).convert_alpha(); # load in coin image, convert_alpha will keep transparent background
coin = pygame.transform.scale(coin, (16, 16)) # resize coin image

Draw Coins

In the code to draw the map, we are drawing player objects:

        elif isinstance(layer, pytmx.TiledObjectGroup):
            for object in layer:#for each object, if it is a coin or player then draw it
                if(object.type=="Player"):
                    SCREEN.blit(player, [object.x - CAMERA.x +(SCREENWIDTH/2), object.y - CAMERA.y + (SCREENHEIGHT/2)])

We need to extend the if statement to also check if the object.type is a Coin:

        elif isinstance(layer, pytmx.TiledObjectGroup):
            for object in layer:#for each object, if it is a coin or player then draw it
                if (object.type=='Coin'):
                    SCREEN.blit(coin, [object.x - CAMERA.x +(SCREENWIDTH/2), object.y - CAMERA.y + (SCREENHEIGHT/2)])
                elif(object.type=="Player"):
                    SCREEN.blit(player, [object.x - CAMERA.x +(SCREENWIDTH/2), object.y - CAMERA.y + (SCREENHEIGHT/2)])

Now coins will be drawn in position on your map.

List of Collectables

You now need to read in each of the objects into a list, this code must go after you read in the map and shouldn't be in the game loop or method:

#Create a list of collectables
objects = tiled_map.get_layer_by_name('Objects')
items = []
for object in objects:
    items.append(object)

This code creates an empty list for the items, you read in the object layer into objects. Then you cycle through each object and add it to the list.

Check Coins

Now we have a list of items we can check the position of each one and the player:

def checkcoins(playerrec):
    for item in items:
        if(item.type=='Coin'):
            coinrec = pygame.Rect([item.x, item.y, item.width, item.height])
            if (coinrec.colliderect(playerrec) and (item.visible!=0)):
                item.visible = 0

this accepts a rectangle for the player, and then for each item it creates a rectangle and then checks for a collision. If a collision has occurred this sets the item.visible to 0. This will stop it from been drawn. Notice we also check that the item.visibile is not equal to 0, this is so we can't collect something invisible.

Adding to Game Loop

Now in the game loop add this to check for collectables:

    #check coins with the current position of the player
    checkcoins(pygame.Rect([tiled_map.get_object_by_name("Player").x,tiled_map.get_object_by_name("Player").y,
                            tiled_map.get_object_by_name("Player").width,tiled_map.get_object_by_name("Player").height]))

Key & Door

Edit your tiled map by adding a key object into the objects layer, and also place a door object in your main layer which represents your door:

Check Key code

You could either add code to check the key into the current checkcoins method or just create a separate method. We need to create a list of the objects, this will be for keys and doors. This might seem overkill when there is just one key and one door, however you could expand you map to have many keys and doors. So find your checkcoins method:

def checkcoins(playerrec):
    for item in items:
        if(item.type=='Coin'):
            coinrec = pygame.Rect([item.x, item.y, item.width, item.height])
            if (coinrec.colliderect(playerrec) and (item.visible!=0)):
                item.visible = 0

We will extend this to also check for keys:

def checkcoins(playerrec):
    for item in items:
        if(item.type=='Coin'):
            coinrec = pygame.Rect([item.x, item.y, item.width, item.height])
            if (coinrec.colliderect(playerrec) and (item.visible!=0)):
                item.visible = 0
        elif(item.type=='Key'):
            keyrec = pygame.Rect([item.x, item.y, item.width, item.height])
            if (keyrec.colliderect(playerrec) and (item.visible!=0)):
                item.visible = 0

Extra Logic

At the moment we need to count how many coins have been collected, this will be used to then make the key visible. So declare a new variable, before the game loop, called coincount and set it to be 0:

coincount = 0

Now in he checkcoin method we need to increment the coincount, and check when enough have been collected. Find this code:

        if(item.type=='Coin'):
            coinrec = pygame.Rect([item.x, item.y, item.width, item.height])
            if (coinrec.colliderect(playerrec) and (item.visible!=0)):
                item.visible = 0

We need to add the following bits after item.visible = 0:

    if(item.type=='Coin'):
        coinrec = pygame.Rect([item.x, item.y, item.width, item.height])
        if (coinrec.colliderect(playerrec) and (item.visible!=0)):
            item.visible=0
            global coincount
            coincount = coincount+1
            if (coincount==3):
                coincount = 0
                print("show key")
                for item in keydoor:
                    if (item.name=="Key"):
                        item.visible = 1;

the code global coincount will allow access to the coincount variable, without this line we couldn't access coincount. The code increments coincount and then check to see if the coincount is equal to 3. If it is, get the key from keyDoor and change the visibility. This will now display the key, and currently when you collect the key it just sets the key to be invisible.

Key Unlocks Door

We need to add a variable to the program to say if the key is collected or not:

KeyCollect = False

At the moment the main thing preventing the player from leaving the map are the bounds we have in the collision layer. So we will get the the position of the door, find the tiles it is over and remove them from the collision layer, and finally we need to make the door invisible. Firstly find the checkcoin method, and find the key checker and add the KeyCollect = True line:

        elif(item.type=='Key'):
            keyrec = pygame.Rect([item.x, item.y, item.width, item.height])
            if (keyrec.colliderect(playerrec) and (item.visible!=0)):
                item.visible = 0
                global KeyCollect
                KeyCollect = True

Add a new elif to check for the door:

        elif(item.type=='Door') and (KeyCollect):
            doorrec = pygame.Rect([item.x, item.y, item.width, item.height])
            if (dorrec.colliderect(playerrec) and (item.visible!=0)):
                item.visible = 0 #or move elsewhere on the map, or load another map

Notice it also checks to see if the key is collected. The item.visible line could be any code to move the player or move to another map etc.